A wire
is a single, usually cylindrical, string of metal. Wires are used to bear mechanical loads and to carry electricity and telecommunications signals. Wire is commonly formed by drawing the metal through a hole in a die or draw plate. Standard sizes are determined by various wire gauges. The term wire
is also used more loosely to refer to a bundle of such strands, as in 'multistranded wire', which is more correctly termed a wire rope in mechanics, or a cable in electricity.
|
WIRE TICKETS
|
History
In
antiquity,
jewellery often contains, in the form of chains and applied decoration, large amounts of wire that is accurately made and which must have been produced by some efficient, if not technically advanced, means. In some cases, strips cut from metal sheet were made by pulling them through perforations in stone beads. This causes the strips to fold round on themselves to form thin tubes. This strip drawing technique was in use in
Egypt by the
2nd Dynasty. From the middle of the
2nd millennium BC most of the
gold wires in jewellery are characterized by seam lines that follow a spiral path along the wire. Such twisted strips can be converted into solid round wires by rolling them between flat surfaces or the strip wire drawing method. Strip and block twist wire manufacturing methods were still in use in
Europe in the 7th century AD, but by this time there seems to be some evidence of wires produced by true
drawing.
Square and hexagonal wires were possibly made using a
swaging technique. In this method a metal rod was struck between grooved metal blocks, or between a grooved punch and a grooved metal anvil. Swaging is of great antiquity, possibly dating to the beginning of the 2nd millennium BC in Egypt and in the
Bronze and
Iron Ages in Europe for
torches and
fibulae.
Twisted square section wires are a very common
filigree decoration in early
Etruscan jewellery.
In about the middle of the 2nd millennium BC a new category of decorative wires was introduced which imitated a line of granules. Perhaps the earliest such wire is the notched wire which first occurs from the late
3rd, early 2nd millennium BC in
Anatolia and occasionally later.
Wire was
drawn in England from the medieval period. The wire was used to make wool cards and pins, manufactured goods whose import was prohibited by
Edward IV in 1463.
[1] The first wire mill in
Great Britain was established at
Tintern in about 1568 by the founders of the
Company of Mineral and Battery Works, who had a
monopoly on this.
[2] Apart from their second wire mill at nearby Whitebrook,
[3] there were no other wire mills before the second half of the 17th century. Despite the existence of mills, the drawing of wire down to fine sizes continued to be done manually.
Wire is usually drawn of cylindrical form; but it may be made of any desired section by varying the outline of the holes in the draw-plate through which it is passed in the process of manufacture. The
draw-plate or
die is a piece of hard cast-iron or hard steel, or for fine work it may be a
diamond or a
ruby. The object of utilizing precious stones is to enable the dies to be used for a considerable period without losing their size, and so producing wire of incorrect diameter. Diamond dies must be rebored when they have lost their original diameter of hole, but the metal dies are brought down to size again by hammering up the hole and then drifting it out to correct diameter with a punch.
Uses
Wire has many uses. It forms the raw material of many important
manufacturers, such as the wire-net industry, wire-cloth making and wire-
rope spinning, in which it occupies a place analogous to a
textile fiber. Wire-
cloth of all degrees of strength and fineness of mesh is used for sifting and screening machinery, for draining
paper pulp, for window screens, and for many other purposes. Vast quantities of
aluminum,
copper,
nickel and
steel wire are employed for telephone and data wires and cables, and as conductors in
electric power transmission, and heating. It is in no less demand for fencing, and much is consumed in the construction of suspension bridges, and cages, etc. In the manufacture of stringed musical instruments and scientific instruments wire is again largely used. Among its other sources of consumption it is sufficient to mention pin and hair-pin making, the needle and fish-hook industries, nail, peg and rivet making, and carding machinery; indeed there are few industries into which it does not enter.
Not all metals and metallic
alloys possess the physical properties necessary to make useful wire. The metals must in the first place be
ductile and strong in tension, the quality on which the utility of wire principally depends. The metals suitable for wire, possessing almost equal ductility, are
platinum,
silver,
iron,
copper,
aluminum and
gold; and it is only from these and certain of their
alloys with other metals, principally
brass and
bronze, that wire is prepared. By careful treatment extremely thin wire can be produced. Special purpose wire is however made from other metals (e.g.
tungsten wire for
light bulb and
vacuum tube filaments, because of its high melting temperature). Copper wires could be plated with other metals, such as tin, nickel, and silver to handle different temperatures.
Production
Wire is often reduced to the desired diameter and properties by repeated
drawing through progressively smaller dies, or traditionally holes in
draw plates. After a number of passes the wire may be
annealed to facilitate more drawing or, if it is a finished product, to maximize ductility and conductivity.
Finishing, jacketing, and insulating
Electrical wires are usually covered with
insulating materials, such as plastic, rubber-like polymers, or varnish. Insulating and jacketing of wires and cables is nowadays done by passing them through an extruder. Formerly, materials used for insulation included treated cloth or paper, and various oil-based products. Since the mid-1960s,
plastic and
polymers exhibiting properties similar to rubber have predominated.
Two or more wires may be wrapped concentrically, separated by insulation, to form
coaxial cable. The wire or cable may be further protected with substances like
paraffin, some kind of preservative compound, bitumen,
lead, or
aluminum sheathing, or steel taping.
Stranding or covering machines wind material onto wire which passes through quickly. Some of the smallest machines for cotton covering have a large drum, which grips the wire and moves it through toothed gears; the wire passes through the centre of disks mounted above a long bed, and the disks carry each a number of
bobbins varying from six to twelve or more in different machines. A supply of covering material is wound on each bobbin, and the end is led on to the wire, which occupies a central position relatively to the bobbins; the latter being revolved at a suitable speed bodily with their disks, the cotton is consequently served on to the wire, winding in spiral fashion so as to overlap. If a large number of strands are required the disks are duplicated, so that as many as sixty spools may be carried, the second set of strands being laid over the first.
For heavier cables, used for
electric light and power, and submarine cables, the machines are somewhat different in construction. The wire is still carried through a hollow shaft, but the bobbins or spools of covering material are set with their spindles at right angles to the axis of the wire, and they lie in a circular cage which rotates on rollers below. The various strands coming from the spools at various parts of the circumference of the cage all lead to a disk at the end of the hollow shaft. This disk has perforations through which each of the strands pass, thence being immediately wrapped on the cable, which slides through a bearing at this point. Toothed gears having certain definite ratios are used to cause the winding drum for the cable and the cage for the spools to rotate at suitable relative speeds which do not vary. The cages are multiplied for stranding with a large number of tapes or strands, so that a machine may have six bobbins on one cage and twelve on the other.
Solid versus stranded
Solid wire, also called solid-core or single-strand wire, consists of one piece of metal wire. Stranded wire is composed of a bundle of small-gauge wires to make a larger conductor.
Stranded wire is more flexible than solid wire of the same total cross-sectional area. Solid wire is cheaper to manufacture than stranded wire and is used where there is little need for flexibility in the wire. Solid wire also provides mechanical ruggedness; and, because it has relatively less surface area which is exposed to attack by corrosives, protection against the environment. Stranded wire is used whenever ease of bending or repeated bending are required. Such situations include
connections between
circuit boards in
multi-printed-circuit-board devices, where the rigidity of solid
wire would produce too much stress as a result of movement during
assembly or servicing;
A.C. line cords for
appliances; musical instrument cables; computer mouse cables; welding electrode cables; control cables connecting moving machine parts; mining machine cables; trailing machine cables; and numerous others.
At high frequencies, current travels near the surface of the wire because of the
skin effect
, resulting in increased power loss in the wire. Stranded wire might seem to reduce this effect, since the total surface area of the strands is greater than the surface area of the equivalent solid wire, but in fact a simple stranded wire will have worse skin effect than a solid wire, because of its increased average resistivity due to inclusion of air gaps within the wire. (
The foregoing discussion of the consequences of the skin effect has been disputed on the talk page.
)
However, for many high-frequency applications,
proximity effect
is more severe than
skin effect, and in some limited cases, simple stranded wire can reduce proximity effect. For better performance at high frequencies,
litz wire, which has the individual strands insulated and twisted in special patterns, may be used.
Number of strands
The more individual wire strands in a wire bundle the more flexible, kink resistant, break resistant, and stronger the wire is. But more strands cost more.
The lowest number of stands is 7. One in the middle, and 6 surrounding it.
The next level up is 19, which is another layer of 12 strands on top of the 7. After that the number varies, but 37 and 49 are common, then in the 70 to 100 range (the number is no longer exact). Even larger numbers than that are typically found only in very large wires. .
For application where the wire moves 19 is the lowest that should be used (7 should only be used in applications where the wire is placed and then doesn't move), and 49 is much better. For applications with constant repeated movement, such as assembly robots, and headphone wires, 70 to 100 is mandatory.
Varieties
See also
- Barbed wire
- Cable
- Chicken wire
- Electrical wiring
- Litz wire
- Razor wire
- Tape wire
- THHN
- Wire gauge
- Wire netting
- Wire rope
- Welding wire
- Wollaston wire
References
- H. R. Schubert, 'The wiredrawers of Bristol' ''Journal Iron & Steel Inst.'' 159 (1948), 16-22.
- M. B. Donald, ''Elizabethan Monopolies: Company of Mineral and Battery Works'' (Olver & Boyd, Edinburgh 1961), 95-141.
- D. G. Tucker, 'The seventeenth century wireworks at Whitebrook, Monmouthshire' ''Bull. Hist. Metall. Gp'' 7(1) (1973), 28-35.